1967 Datsun 411 Wagon
This is a 1967 PL411 Wagon that had come with a J13 motor but it was seized. I did a lot of custom fabirication to fit a stroked R16 into the car with a Roadster 5 speed. The carbs are the 411 style and I custom made an exhaust header to go through the drivers fender well just like a true SSS wagon. The car is painted in Datsun 562 teal and the seats are black with piping matching the exterior. The carpet is new with sound deadening put down first. All kick panels and door panels are new as well.. The dash still needs recovered and the headliner needs to be done as well. It is missing the interior panel on the lift gate as I never got one with the car. The front and rear bumpers were removed and the holes patched so it looks like factory! The car was designed by Pina Farina and the front bumper was killing the styling!! The dash has LED lights and the speedometer was just professionally restored. The turn signals recently stopped working and I suspect it is the relay. I will work on replacing the relay and getting them working again prior to the sale. The only rust in the car was the bottom of the rear quarters and they were cut out and new sheet metal installed. The floors were surprising solid and needed no patch work. The paint is a few years old and has some small dry spots but is a real head turner. The front drum brakes were converted to Infinity G20 disc brakes. The entire front suspension was removed stripped, painted and put back together with new upper and lower balljoints and tie rod ends. the front springs were replaced with a set of roadster comp springs to lower it and the rear got lowing blocks with new shocks. There is some room in the price and I can send you more pictures of the restoration if you send me a request via email at sincitydatsuns@yahoo.com